RT97 Portable GMRS Repeater Mobile Repeater

Very nice products.

Just wanted to let you know the repeater operates up to 20 miles from my garage which is phenominal! Never expected that far out! Using a Tram uhf antenna with 1/2 hardline. Antenna is 30 feet up.

Great (real world) repeater, and a very nice repeater! 😎 There are no GMRS repeaters in our rural area, so I was also very curious about repeaters! I live in a similar remote "So-Cal" high desert location and have been seriously considering a GMRS repeater to connect with my other rural neighbors in our small remote community. There are numerous advantages to this type of (off-the-grid) communication, such as... Neighborhood watch, Wildfire updates, Head's-up warnings, Grid-down issues, "My dog is out again", "Has anyone seen my Horse, Pig, Cow, Chickens", etc. I plan to have a GMRS repeater in my neighborhood operational within the next couple of months. I buy it, and this work great

Surprisingly, the repeater arrived today. So much for accurate tracking info from Amazon. Anyway, I connected it to a GMRS tuned J-Pole antenna that I have on top of a 25' mast, attached to the side of my house. I did a simple range test using 2 Baofeng UV-9Gs... as I drove North from my house. I was able to talk to my wife on her UV-9G, roughly 4 to 5 miles away. I live in PA where I'm surrounded by hills and trees, so I was pretty impressed with the results. I'm sure the line of sight was not very good. My next test will be to drive south and see how many fars I get in that direction. :)

Portability, easy to transport and connection to DC voltage in the car or AC voltage to house makes it very useful.

Excellent mobile repeater. Great range and easy to program. I mounted this in a all weather carry case I picked up at job lot. I modified the case to hold the repeater and built inputs on the outside for AC voltage, DC voltage, as well as an antenna input. This has been placed under my sunroom outside and has been rock solid. I mounted the antenna on an existing mast for my weather station, I purchased a chain link fence top rail from Home Depot to mount the antenna to. I purchased the a bundle from Retevis which included the repeater (AC and DC power adaptors, programming cable, instructions) exterior antenna as well as a 50 foot cable. Shipping was about a week and Retevis was very responsive with questions that I had had. Remember, GMRS operates at line of sight, so the higher your elevation with your antenna the larger the coverage area. Plan on taking this camping and on road trips. Highly recommend!

I unpacked and used my new RT97 today and i am pleased with it. I attached an antenna and plugged it in -- and it works. The basic UI is easy to understand. There are 8 channels as allowed by GMRS rules. The display shows transmit and recieve frequencies. You can also see the privacy code on each channel with a button press (CTCSS 136.5 is the preset privacy code on all channels). A couple of things you must do: set every radio to the same repeater channel, and set every radio to the same privacy code. I have Baofeng UV9G and Radioddity GM-30 handhelds. First decide which channel you want to use. I decided to use GMRS repeater channel 5 & used the front panel to set the RT97 to channel 5. I set my radios to "RPT-5" on the Radioddity, and "REPTR5" on the Baofeng. Next set the privacy codes on the handhelds to CTCSS 136.5. On the Baofeng UV-9G press the menu key, scroll to menu #13, "T-CTCS". Press the menu button again and use the up/down keys to select "136.5HZ". Press the menu key to enter that code, then press the exit button. Similarly, on the Radioddity GM-30 press the menu key, scroll to menu #12 "Tx CTCSS". Press the menu key and use the up/down keys to select "136.5 Hz" and press the menu key again to enter the value. Exit the menu. That's all it took to get it working. If you want to change the privacy code in the RT97 use the software from the Support page on this website,

After watching many of the videos and reviews done by fellow Ham radio users, I decided to get the GMRS version so that in the event of an emergency in my area, people who didn't have a ham license could use this repeater for emergency communications. We have been doing a lot of testing on locating the repeater, and it has worked perfectly. Having the programming already done made it very easy to initially setup and should be easy to maintain. We are looking at purchasing more repeaters to allow us to provide additional coverage.

This is repeater comes in VHF or UHF. I ordered the UHF unit with customized frequencies. The P model is similar to the original RT97 but does both FM and DMR mode. After many months pondering if I should get one of these, I regret not doing so earlier. This is a fantastic bit of kit. It just works right out of the box! Just request what you need and it will be factory programmed and the notch filter will be tuned accordingly. Nothing you need to do except plug in your power and antenna. Noted, don't expect the output at the antenna to be a full 10W. The transmitter is 10W, but you will see just over 5W at the antenna port. Remember this is a small portable repeater and notch filters do consume a little of your RF TX power. Saying that, 5W is more than enough and it does exactly what it says on the tin for a small and very portable repeater system. I give this a full rating as I cannot complain at all. It works and it works very well in both FM and DMR modes. Pre and post sales support for the repeater has also been excellent. John.

Great repeater! The range is as expected and the setup takes less than 5 minutes. Each channel is already set up with a preset CTCSS tone, so one can get started without extensive programming. The sound quality is fantastic. Device is super lightweight Things to improve: - The documentation isn't very clear (fortunately the device is easy to set up in its absence) - I had issues with getting the programming software to work on a Windows VM on MacOS/Linux, even though the rest of my GMRS/ham software works just fine with a VM. No issues with a base Windows installation, but having to install dedicated Windows was a bit of a pain (fortunately the factory presets are fantastic so it's not really necessary to customize)